Ing. Radek Mušálek, Ph.D. [ Scientific Worker, Department of Materials Engineering ]

Place: Main Building, Office: A 010
Tel.: (+420) 266 053077
Fax: (+420) 286 586 389
Email: musalek@ipp.cas.cz

Research Interests

Education

2006 - 2010PhD student
Dept. of Materials, FNSPE, CTU in Prague
Changes in Microstructure and Mechanical Properties of Thermal Spray Coatings during Different Modes of Loading
2001 - 2006Master's programme
Dept. of Materials, FNSPE, CTU in Prague
Special Materials Characteristics of High Strength Sheets for Automotive Indrustry

Research experience

Summer 2008Visiting scholar
Center for Thermal Spray Research, Stony Brook University, USA

Academic Awards

2010Certificate of Merit, Milan Odehnal Awards 2010
Awarded by : Czech Physics Society
for work on properties of thermal spray coatings

Supervised students

2013 - now Tomáš Tesař
Preparation of Bc. diploma work
Indentation Testing of Materials Processed by Plasma Technology
2012-2014Ing. Aleš Glanc
Supervisor
Preparation of Process Maps for Deposition of WSP Coating
2008-2012Ing. Václav Pejchal
Supervisor
Mechanical Properties of Thermal spray Coatings
2008-2009Ing. Lukáš Rapavý
Supervisor
Fatigue behaviour of bodies coated with Fe-Al based intermetallics

Research projects

2015-2019Research center of surface treatment
Co-investigator
Provider: Technological Agency of the Czech Republic; Project ID: TE02000011
2017-2019Influence of defects on properties of bio-compatible high entropy alloys
Co-investigator
Provider: Czech Science Foundation; Project ID: GA17-17016S
2014-2018Multidisciplinary research centre for advanced materials
Co-investigator
Provider: Czech Science Foundation; Project ID: GB14-36566G
2015-2017Ultrafine-grained and nanocrystalline metals with high strength prepared by pulsed electric current sintering
Co-investigator
Provider: Czech Science Foundation; Project ID: GA15-15609S
2015-2017Physical aspects of plasma spray deposition from liquid feedstock
Principal investigator
Provider: Czech Science Foundation; Project ID: GA15-12145S
2012-2014Failure processes of layered materials near phase boundaries
Principal investigator
Provider: Czech Science Foundation; Project ID: GPP108/12/P552
2012-2014Materials for New Millennium
Co-investigator
Provider: Ministry of Education, Youth and Sports of the Czech Republic; Project ID: CZ.1.07/2.3.00/35.0009
2007-2011Evolution of structure and mechanical properties of plasma sprayed materials under various loading
Co-investigator
Provider: Ministry of Education, Youth and Sports of the Czech Republic; Project ID: ME 901
2005-2008New Materials for Extreme Environments (EXTREMAT)
Co-investigator
Provider: European Union; Project ID: NMP3-CT-2004-500253

List of Publications

2017Kubatík T., Ctibor P., Mušálek R., Janata M.: Mechanical properties of plasma-sprayed layers of aluminium and aluminium alloy on AZ 91. Materials and Technology 51 [2] (2017) 323-327.
[ Abstract ]
[ Link ]
 
 Kubatík T., Lukáč F., Mušálek R., Brožek V., Stehlíková K., Chráska T.: Compaction of lithium-silicate ceramics using spark plasma sintering. Ceramics - Silikáty 61 [1] (2017) 40-44.
[ Abstract ]
[ Link ]
 
 Mušálek R., Medřický J., Tesař T., Kotlan J., Pala Z., Lukáč F., Chráska T., Curry N.: Suspensions Plasma Spraying of Ceramics with Hybrid Water-Stabilized Plasma Technology. Journal of Thermal Spray Technology 26 [1-2] (2017) 37-46.
[ Abstract ]
[ Link ]
 
[ISTC 2016: International Thermal Spray Conference. Shanghai, 10.05.2016-12.05.2016]
 Tesař T., Mušálek R., Medřický J., Kotlan J., Lukáč F., Pala Z., Ctibor P., Chráska T., Houdková Š., Rimal V., Curry N.: Development of suspension plasma sprayed alumina coatings with high enthalpy plasma torch. Surface and Coatings Technology 325 [September] (2017) 277-288.
[ Abstract ]
[ Link ]
 
 Mušálek R., Medřický J., Kotlan J., Tesař T., Lukáč F., Ctibor P., Illkova K., Chráska T.: High Feed Rate Plasma Spraying of YSZ from Various Suspensions. ITSC 2017 - Proceedings of the International Thermal Spray Conference. Düsseldorf: DVS Media GmbH, 2017, s. 36-41. ITSC. ISBN 978-3-96144-000-9.
[ Abstract ]

[ITSC 2017: International Thermal Spray Conference and Exposition. Düsseldorf (DE), 07.06.2017-09.06.2017]
 Sokołowski P., Björklund S., Mušálek R., Candidato Jr., Pawłowski L., Nait-Ali B., Smith D.: Thermophysical properties of YSZ and YCeSZ suspension plasma sprayed coatings having different microstructures. Surface and Coatings Technology 318 [May] (2017) 28-38.
[ Abstract ]
[ Link ]
 
[International Meeting on Thermal Spraying (RIPT)/7./. Limoges, 09.12.2015-11.12.2015]
 Sokołowski P., Nylen P., Mušálek R., Łatka L., Kozerski S., Dietrich D., Lampke T., Pawłowski L.: The microstructural studies of suspension plasma sprayed zirconia coatings with the use of high-energy plasma torches. Surface and Coatings Technology 318 [May] (2017) 250-261.
[ Abstract ]
[ Link ]
 
[International Meeting on Thermal Spraying (RIPT)/7./. Limoges, 09.12.2015-11.12.2015]
2016Koller M., Seiner H., Sedlák P., Kotlan J., Ctibor P., Mušálek R., Landa M.: Application of laser-ultrasound for characterization of plasma-sprayed ceramics. Defect and Diffusion Forum. Vol. 368. Zürich: Trans Tech Publications Ltd, 2016 - (Louda, P.), s. 69-72, č. článku 4. 368. ISBN 978-3-03835-720-9. ISSN 1012-0386.
[ Abstract ]
[ Link ]
 
[International Conference on Local Mechanical Properties /12./. Liberec (CZ), 04.11.2015-06.11.2015]
 Kotlan J., Pala Z., Mušálek R., Ctibor P.: On reactive suspension plasma spraying of calcium titanate. Ceramics International 42 [3] (2016) 4607-4615.
[ Abstract ]
[ Link ]
 
 Kovářík O., Haušild P., Medřický J., Tomek L., Siegl J., Mušálek R., Curry N., Björklund S.: Fatigue Crack Growth in Bodies with Thermally Sprayed Coating. Journal of Thermal Spray Technology 25 [1-2] (2016) 311-320.
[ Abstract ]
[ Link ]
 
[International Thermal Spray Conference 2015. Long Beach, California, 11.05.2015-14.05.2015]
 Kovářík O., Haušild P., Čapek J., Medřický J., Siegl J., Mušálek R., Pala Z., Curry N., Bjorklund S.: Resonance bending fatigue testing with simultaneous damping measurement and its application on layered coatings. International Journal of Fatigue 82 [January] (2016) 300-309.
[ Abstract ]
[ Link ]
 
[International Conference on Fatigue Damage of Structural Materials Conference/10./. Massachusetts, 21.09.2014-26.09.2014]
 Mušálek R., Kovářík O., Tomek L., Medřický J., Pala Z., Haušild P., Čapek J., Kolařík K., Curry N., Bjorklund S.: Fatigue performance of TBCs on Hastelloy X substrate during cyclic bending. Journal of Thermal Spray Technology 25 [1-2] (2016) 231-243.
[ Abstract ]
[ Link ]
 
[International Thermal Spray Conference 2015. Long Beach, California, 11.05.2015-14.05.2015]
 Hlína M., Mašláni A., Medřický J., Kotlan J., Mušálek R., Hrabovský M.: DIAGNOSTICS OF HYBRID WATER/ARGON THERMAL PLASMA JET WITH WATER, ETHANOL AND THEIR MIXTURE INJECTION TO PLASMA. Plasma Physics and Technology 3 [2] (2016) 62-65.
[ Abstract ]
[ Link ]
 
[SPPT 2016 - 27th Symposium on Plasma Physics and Technology/27./. Prague, 20.06.2016-23.06.2016]
 Mušálek R., Medřický J., Kotlan J., Tesař T., Pala Z., Lukáč F., Chráska T.: Plasma Spraying of Suspensions with Hybrid Water-Stabilized Plasma Technology. ITSC 2016 - Proceedings of the International Thermal Spray Conference. Düsseldorf: DVS Media GmbH, 2016, s. 267-272. ITSC, 2016. ISBN 978-3-87155-574-9.
[ Abstract ]

[ITSC 2016: International Thermal Spray Conference and Exposition. Shanghai (CN), 10.05.2016-12.05.2016]
 Tesař T., Mušálek R., Medřický J., Lukáč F.: Plazmové stříkání z kapalné fáze: interakce kapaliny s proudem plazmatu a vznik nástřiku. Sborník přednášek studentské vědecké konference JuveMatter 2016. Praha: České vysoké učení technické v Praze, 2016 - (Kunz, J.), s. 47-52. ISBN 978-80-01-05999-9. [ EN ] 
[ Abstract ]

[JuveMatter 2016. Praha (CZ), 23.05.2016]
 Tesař T., Mušálek R., Medřický J., Kotlan J., Ctibor P., Lukáč F., Houdková Šimůnková Š.: Porovnání mechanických vlastností práškových a suspenzních plazmových nástřiků oxidu hlinitého. Vrstvy a povlaky 2016. Zborník prednášok.. Trenčianská Teplá: M-PRESS, 2016, s. 95-100. ISBN 978-80-972133-1-2. [ EN ] 
[ Abstract ]

[Vrstvy a povlaky 2016/15./. Rožnov pod Radhoštěm (CZ), 17.10.2016-18.10.2016]
 Mušálek R., Medřický J., Tesař T., Kotlan J., Lukáč F.: Deposition of Titania from Solution by Hybrid Water-Stabilized Plasma Torch. METAL 2016 – Conference proceedings: 25th Anniversary International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd., Ostrava, 2016, s. 1121-1126. METAL. ISBN 978-80-87294-67-3.
[ Abstract ]
[ Link ]
 
[METAL 2016 - 25th Anniversary International Conference on Metallurgy and Materials/25./. Brno (CZ), 25.05.2016-27.05.2016]
 Sokolowski P., Mejias A., Chicot D., Mušálek R., Nylen P., Pawlowski L.: The evaluation of mechanical properties of suspension plasma sprayed zirconia coatings having various microstructures. ITSC 2016 - Proceedings of the International Thermal Spray Conference. Düsseldorf: DVS Media GmbH, 2016, s. 573-578. ITSC, 2016. ISBN 978-3-87155-574-9.
[ Abstract ]

[ITSC 2016: International Thermal Spray Conference and Exposition. Shanghai (CN), 10.05.2016-12.05.2016]
2015Tesař T., Mušálek R., Medřický J., Kotlan J., Pala Z.: První experimenty s přípravou suspenzního nástřiku Al2O3 pomocí hybridního plazmového hořáku. Vrstvy a povlaky 2015. Rožnov pod Radhoštěm : LISS, 2015, s. 165-170. ISBN 978-80-972133-0-5. [ EN ] 
[ Abstract ]
[ Link ]
 
[Vrstvy a povlaky 2015/14./. Rožnov pod Radhoštěm (CZ), 19.10.2015-20.10.2015]
 Valarezo A., Dwivedi G., Sampath S., Mušálek R., Matějíček J.: Elastic and anelastic behavior of TBCs sprayed at high-deposition rates. Journal of Thermal Spray Technology 24 [1-2] (2015) 160-167.
[ Abstract ]
[ Link ]
 
 Mušálek R., Kovářík O., Medřický J., Curry N., Bjorklund S., Nylen P.: Fatigue testing of TBC on structural steel by cyclic bending. Journal of Thermal Spray Technology 24 [1-2] (2015) 168-174.
[ Abstract ]
[ Link ]
 
 Chráska T., Pala Z., Mušálek R., Medřický J., Vilémová M.: Post-treatment of Plasma-Sprayed Amorphous Ceramic Coatings by Spark Plasma Sintering. Journal of Thermal Spray Technology 24 [4] (2015) 637-643.
[ Abstract ]
[ Link ]
 
 Kotlan J., Seshadri R.C., Sampath S., Ctibor P., Pala Z., Mušálek R.: On the dielectric strengths of atmospheric plasma sprayed Al2O3 ,Y2O3 , ZrO2 - 7% Y2O3 and (Ba,Sr)TiO3 coatings. Ceramics International 41 [9] (2015) 11169-11176.
[ Abstract ]
[ Link ]
 
 Mušálek R., Tesar T., Stráský J., Cech J.: Combined Indentation Testing of Spark Plasma Sintered Steels. Key Engineering Materials. Vol. 662. Durnten-Zurich : Trans Tech Publications Ltd, 2015, s. 43-46. ISSN 1662-9795.
[ Abstract ]
[ Link ]
 
[Conference on Local Mechanical Properties (LMP 2014)/11./. Stará Lesná (SK), 12.11.2014-14.11.2014]
 Mušálek R., Vilémová M., Matějíček J., Taltavull C., Lopez Galisteo A.J.: In-situ Observation of Ongoing Microstructural Changes in Functionally Graded Thermal Spray Coating during Mechanical Loading. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. India : Valardocs, 2015 - (Sudarshan, T.; Vuoristo, P.; Koivuluoto, H.), s. 571-578 ISBN 978-81-926196-1-3.
[ Abstract ]
[ Link ]
 
[International Conference on Surface Modification Technologies/28./. Tampere (FI), 16.06.2014-18.06.2014]
 Pala Z., Fojtíková J., Koubský T., Mušálek R., Stráský J., Kyncl J., Beránek L., Kolárik K.: Study of residual stresses, microstructure, and hardness in FeB and Fe2B ultra-hard layers. Powder Diffraction 30 [S1] (2015) S83-S89.
[ Abstract ]
[ Link ]
 
 Brožek V., Kubatík T., Chráska T., Mušálek R., Janata M., Mastný L.: Chemical aspects of antiballistic cermets preparation. Proceedings of the 3rd International Conference on Chemical Technology, ICCT 2015. Prague : Czech Society of Industrial Chemistry, 2015 - (Kalenda, P.; Lubojacký, J.), s. 218-224 ISBN 978-80-86238-79-1. - (ICCT).
[ Abstract ]
[ Link ]
 
[International Conference on Chemical Technology-ICCT2015/3./. Mikulov (CZ), 13.04.2015-15.04.2015]
 Kubatík T., Vilémová M., Mušálek R., Janata M.: Mechanical and chemical properties of plasma sprayed bronze CuAl10 coating on magnesium and magnesium alloy AZ91. Proceedings of the 3rd International Conference on Chemical Technology, ICCT 2015. Prague : Czech Society of Industrial Chemistry, 2015 - (Kalenda, P.; Lubojacký, J.), s. 230-234 ISBN 978-80-86238-79-1. - (ICCT).
[ Abstract ]
[ Link ]
 
[International Conference on Chemical Technology-ICCT2015/3./. Mikulov (CZ), 13.04.2015-15.04.2015]
 Kubatík T., Pala Z., Neufuss K., Vilémová M., Mušálek R., Stoulil J., Slepička P., Chráska T.: Metallurgical bond between magnesium AZ91 alloy and aluminium plasma sprayed coatings. Surface and Coatings Technology 282 [November] (2015) 163-170.
[ Abstract ]
[ Link ]
 
 Mušálek R., Bertolissi G., Medřický J., Kotlan J., Pala Z., Curry N.: Feasibility of suspension spraying of yttria-stabilized zirconia with water-stabilized plasma torch. Surface and Coatings Technology 268 [April] (2015) 58-62.
[ Abstract ]
[ Link ]
 
[Rencontres Internationales de la Projection Thermique/6./. Limoges, 11.12.2013-13.12.2013]
 Kovařík O., Haušild P., Medřický J., Tomek L., Siegl J., Mušálek R., Curry N., Bjorklund S.: Fatigue Crack Growth in Bodies with Thermally Sprayed Coating. Thermal Spray 2015: Proceedings from the International Thermal Spray Conference. Materials Park, OH : ASM International, 2015 - (McDonald, A.; Agarwal, A.; Bolelli, G.; Concustell, A.; Lau, Y.; Toma, F.; Turunen, E.; Widener, C.), s. 398-405 ISBN 978-1-62708-093-4. - (ITSC).
[ Abstract ]

[ITSC 2015: International Thermal Spray Conference and Exposition. Long Beach, California (US), 11.05.2015-14.05.2015]
 Mušálek R., Medřický J., Pala Z., Kovářík O., Tomek L., Curry N., Bjorklund S.: Fatigue Performance of TBCs on Hastelloy X Substrate during Cyclic Bending. Thermal Spray 2015: Proceedings from the International Thermal Spray Conference. Materials Park, OH : ASM International, 2015 - (McDonald, A.; Agarwal, A.; Bolelli, G.; Concustell, A.; Lau, Y.; Toma, F.; Turunen, E.; Widener, C.), s. 406-412 ISBN 978-1-62708-093-4. - (ITSC).
[ Abstract ]

[ITSC 2015: International Thermal Spray Conference and Exposition. Long Beach, California (US), 11.05.2015-14.05.2015]
2014Matějíček J., Mušálek R., Chráska P.: Residual Stresses and Young's Moduli of Plasma Sprayed W+Cu Composites and FGMs Determined by In Situ Curvature Method. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014 - (Haušíld, P.; Materna, A.; Vilémová, M.), s. 151-154 ISSN 1662-9795. - (606).
[ Abstract ]
[ Link ]
 
[International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
 Mušálek R., Taltavull C., Lopez Galisteo A.J., Curry N.: Evaluation of Failure Micromechanisms of Advanced Thermal Spray Coatings by In Situ Experiment. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014 - (Haušíld, P.; Materna, A.; Vilémová, M.), s. 187-190 ISSN 1662-9795.
[ Abstract ]
[ Link ]
 
[International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
 Nohava J., Mušálek R., Matějíček J., Vilémová M.: A contribution to understanding the results of instrumented indentation on thermal spray coatings - Case study on Al2O3 and stainless steel. Surface and Coatings Technology 240 [February] (2014) 243-249.
[ Abstract ]
[ Link ]
 
 Ctibor P., Pala Z., Štengl V., Mušálek R.: Photocatalytic activity of visible-light-active iron-doped coatings prepared by plasma spraying. Ceramics International 40 [1] (2014) 2365-2372.
[ Abstract ]
[ Link ]
 
 Brožek V., Pala Z., Vilémová M., Kubatík T., Mušálek R., Nevrlá B., Mastný L.: Composites of titanium carbide with scandium matrix. METAL 2014: 23rd International Conference on Metallurgy and Materials, conference proceedings. Ostrava : Tanger Ltd, 2014, E90-E90. ISBN 978-80-87294-52-9.
[ Abstract ]

[METAL 2014,International Conference on Metallurgy and Materials/23./. Brno (CZ), 21.05.2014-23.05.2014]
 Chráska T., Medřický J., Mušálek R., Vilémová M., Pala Z., Cinert J.: Post-treatment of plasma sprayed amorphous ceramic coatings by spark plasma sintering. ITSC 2014 :Interational Thermal Spray Conference and Exposition, Abstracts (including manuscripts on CD-ROM). Düsseldorf : DVS Media GmbH, 2014, s. 617-622. ISBN 978-3-87155-574-9. - (DVS-Berichte. 302).
[ Abstract ]
[ Link ]
 
[ITSC 2014 :Interational Thermal Spray Conference and Exposition. Barcelona (ES), 21.05.2014-23.05.2014]
 Brožek V., Kubatík T., Vilémová M., Mušálek R., Mastný L.: Silicon carbide for chemical application prepared by SPS method. Proceedings of the 2nd International Conference on Chemical Technology. Prague : Czech Society of Industrial Chemistry, 2014 - (Kalenda, P.; Lubojacký, J.), s. 129-134 ISBN 978-80-86238-64-7.
[ Abstract ]

[Mezinárodní chemicko-technologická konference/2./. Mikulov (CZ), 07.04.2014-09.04.2014]
 Vilémová M., Nevrlá B., Matějíček J., Mušálek R.: Influence of Preheating Temperature on the Quality of the Interface between Plasma Sprayed Coatings and Substrate. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014 - (Haušíld, P.; Materna, A.; Vilémová, M.), s. 183-186 ISSN 1662-9795. - (606).
[ Abstract ]
[ Link ]
 
[International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
 Janata M., Chráska P., Mušálek R.: Plazmatron a jeho využití ve strojírenském průmyslu. yslové spektrum. - [1-2] (2014) 6-7. [ EN ] 
[ Abstract ]
[ Link ]
 
 Ďuran I., Sentkerestiová J., Kohout M., Mušálek R., Viererbl L., Kovařík K.: Recent Results And Challenges In Development Of Metallic Hall Sensors For Fusion Reactors. AIP Conference Proceedings:FUSION REACTOR DIAGNOSTICS. Vol. 1612. MELVILLE : American Institute of Physics, 2014 - (Gorini, G.; Orsitto, F.; Sozzi, C.; Tardocchi, M.), s. 31-34 ISBN 978-0-7354-1248-4. ISSN 0094-243X. - ( AIP Conference Proceedings. 1612).
[ Abstract ]
[ Link ]
 
[International Conference on Fusion Reactor Diagnostics. Villa Monastero,Varenna (IT), 09.09.2013-13.09.2013]
 Kubatík T., Chráska T., Pala Z., Vilémová M., Mušálek R., Kotlan J., Brožek V., Dubský J.: SiC-Ti composites fabricated by pulsed electric current sintering. Proceedings of the Euro PM2014 Congress. Salzburg : European Powder Metallurgy Association, 2014. ISBN 978-1-899072-45-3.
[ Abstract ]
[ Link ]
 
[Euro powder metallurgy 2014 Congress and Exhibition. Salzburg (AT), 21.09.2014-24.09.2014]
 Mušálek R., Kovářík O., Medřický J., Curry N., Bjorklund S., Nylén P.: Fatigue performance of TBC on structural steel exposed to cyclic bending. ITSC 2014 :Interational Thermal Spray Conference and Exposition, Abstracts (including manuscripts on CD-ROM). Düsseldorf : DVS Media GmbH, 2014, s. 880-885. ISBN 978-3-87155-574-9. - (DVS-Berichte. 302).
[ Abstract ]

[ITSC 2014 :Interational Thermal Spray Conference and Exposition. Barcelona (ES), 21.05.2014-23.05.2014]
 Mušálek R.: Netradiční techniky studia porušování materiálů zpracovaných plazmovou technologií. Sborník přednášek studentské vědecké konference JuveMatter 2014. Praha : České vysoké učení technické v Praze, 2014 - (Kunz, J.), s. 140-145 ISBN 978-80-01-05546-5. [ EN ] 
[ Abstract ]

[Juvematter 2014. Zámek Nečtiny (CZ), 16.05.2014-19.05.2014]
 Mušálek R., Glanc A., Medřický J., Pala Z., Janata M.: Vliv procesních parametrů WSP depozice na vlastnosti Al2O3 nástřiku. Vrstvy a povlaky 2014. Trenčín : Knihviazačstvo, 2014, s. 141-146. ISBN 978-80-970824-3-7. [ EN ] 
[ Abstract ]
[ Link ]
 
[Vrstvy a povlaky 2014. Rožnov pod Radhoštěm (CZ), 20.10.2014-21.10.2014]
 Valarezo A., Dwivedi G., Sampath S., Mušálek R., Matějíček J.: Elastic and anelastic behavior of TBCs sprayed at high deposition rates. ITSC 2014 :Interational Thermal Spray Conference and Exposition, Abstracts (including manuscripts on CD-ROM). Düsseldorf : DVS Media GmbH, 2014, s. 13-19. ISBN 978-3-87155-574-9. - (DVS-Berichte. 302).
[ Abstract ]

[ITSC 2014 :Interational Thermal Spray Conference and Exposition. Barcelona (ES), 21.05.2014-23.05.2014]
 Chráska T., Hrabovský M., Glanc A., Mušálek R., Medřický J.: Properties of Novel Hybrid Water-Gas DC Arc Plasma Torch. Electronic Proceedings of ETSA workshop 2014: Coatings for high temperature applications. Plzeň : University of West Bohemia, 2014 - (Houdková, Š.; Křenek, T.) ISBN 978-80-261-0433-9.
[ Abstract ]
[ Link ]
 
[Workshop on thermal spray and laser clad coatings: Coatings for high temperaure applications. Plzeň (CZ), 14.10.2014-15.10.2014]
 Pala Z., Mušálek R., Kyncl J., Harcuba P., Stráský J., Kolařík K., Ganev N., Matějíček J.: Effect of boriding time on microstructure and residual stresses in borided highly alloyed X210CR12 steel. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014, s. 27-30. ISBN 978-303835-062-0. ISSN 1013-9826. - (606).
[ Abstract ]
[ Link ]
 
[International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
 Pala Z., Kolařík K., Beránek L., Čapek J., Kyncl J., Mušálek R., Ganev N.: Real structure of milled inconel 738LC turbine blades. Advanced Materials Research. Vol. 996. Zürich : Trans Tech Publications, 2014 - (François, M.; Montay, G.; Panicaud, B.; Retraint, D.; Rouhaud, E.), s. 646-651 ISSN 1662-8985. - (996).
[ Abstract ]
[ Link ]
 
[European Conference on Residual Stresses, ECRS 2014/9./. Troyes (FR), 07.07.2014-10.07.2014]
2013Matějíček J., Vilémová M., Mušálek R., Sachr P., Horník J.: The Influence of Interface Characteristics on the Adhesion/Cohesion of Plasma Sprayed Tungsten Coatings. Coatings 3 [2] (2013) 108-125.
[ Abstract ]
[ Link ]
 
 Matějíček J., Kavka T., Bertolissi G., Ctibor P., Vilémová M., Mušálek R., Nevrlá B.: The Role of Spraying Parameters and Inert Gas Shrouding in Hybrid Water-Argon Plasma Spraying of Tungsten and Copper for Nuclear Fusion Applications. Journal of Thermal Spray Technology 22 [5] (2013) 744-755.
[ Abstract ]
[ Link ]
 
 Mušálek R., Pejchal V., Vilémová M., Matějíček J.: Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength. Journal of Thermal Spray Technology 22 [2-3] (2013) 221-232.
[ Abstract ]
[ Link ]
 
[International Thermal Spray Conference (ITSC). Houston, 21.05.2012-24.05.2012]
 Brožek V., Ctibor P., Matějíček J., Mušálek R., Weiss Z.: Tungsten coatings and free standing parts. METAL 2013 Conference Proceedings: 22nd International Conference on Metallurgy and Materials. Ostrava : Tanger spol. s r.o, 2013, 1445-1-14445-6. ISBN 978-80-87294-39-0.
[ Abstract ]
[ Link ]
 
[METAL 2013: International Conference on Metallurgy and Materials/22./. Brno (CZ), 15.05.2013-17.05.2013]
 Mušálek R., Dlabáček Z., Vilémová M., Pala Z., Matějíček J., Chráska T.: Preparation of multiphase materials with spark plasma sintering. METAL 2013 Conference Proceedings: 22nd International Conference on Metallurgy and Materials. Ostrava : Tanger spol. s r.o, 2013, s. 1625-1625. ISBN 978-80-87294-39-0.
[ Abstract ]
[ Link ]
 
[METAL 2013: International Conference on Metallurgy and Materials/22./. Brno (CZ), 15.05.2013-17.05.2013]
 Sedmák P., Seiner H., Sedlák P., Landa M., Mušálek R., Matějíček J.: Application of resonant ultrasound spectroscopy to determine elastic constants of plasma-sprayed coatings with high internal friction. Surface and Coatings Technology 232 [October] (2013) 747-757.
[ Abstract ]
[ Link ]
 
 Mušálek R., Glanc A., Medřický J., Pala Z., Chumak O., Janata M., Chráska T.: Studie opakovatelnosti depozice plazmových nástřiků pomocí technologie WSP. Zborník prednášok Vrstvy a povlaky 2013. Trenčín : LISS a.s, 2013 - (Šošovičková, J.), s. 109-114 ISBN 978-80-970824-2-0. [ EN ] 
[ Abstract ]

[Vrstvy a povlaky 2013. Rožnov pod Radhoštěm (CZ), 30.09.2013-01.10.2013]
 Mušálek R.: Žárové stříkání suspenzí a roztoků. Sborník přednášek studentské vědecké konference JuveMatter 2013. Praha : České vysoké učení technické-nakladatelství ČVUT, 2013 - (Kunz, J.), s. 55-59 ISBN 978-80-01-05359-1. [ EN ] 
[ Abstract ]

[JuveMatter 2013. Horní Lomná (CZ), 09.05.2013-13.05.2013]
 Pala Z., Mušálek R., Kyncl J., Harcuba P., Stráský J., Kolařík K.: Structure, microstructure and residual stresses in borided steels. Materials Structure in Chemistry, Biology, Physics and Technology 20 [2] (2013) 93-95.
[ Abstract ]
[ Link ]
 
[Struktura 2013 - Kolokvium Krystalografické společnosti. Češkovice (Blansko), 09.09.2013-13.09.2013]
2012Mušálek R.: Využití SPS technologie pro přípravu high-tech materiálů. Sborník přednášek studentské vědecké konference JuveMatter 2012. Praha : České vysoké učení technické, 2012 - (Kunz, J.), s. 29-33 ISBN 978-80-01-05073-6. [ EN ] 
[ Abstract ]
[ Link ]
 
[JuveMatter 2012. Vysoká Lípa (CZ), 27.04.2012-30.04.2012]
 Vilémová M., Matějíček J., Mušálek R., Nohava J.: Application of Structure-Based Models of Mechanical and Thermal Properties on Plasma Sprayed Coatings. Journal of Thermal Spray Technology 21 [3-4] (2012) 372-382.
[ Abstract ]
[ Link ]
 
 Mušálek R., Pejchal V., Pala Z., Vilémová M., Matějíček J.: Adhezní/kohezní zkoušení žárových nástřiků při namáhání smykem. Vrstvy a povlaky 2012. Trenčín : LISS a.s, 2012 - (Šošovičková, J.), s. 69-74 ISBN 978-80-970824-1-3. [ EN ] 
[ Abstract ]
[ Link ]
 
[Vrstvy a Povlaky 2012. Rožnov pod Radhoštěm (CZ), 08.10.2012-09.10.2012]
 Bertolissi G., Mušálek R., Brožek V., Chráska T.: Experiments on implementation of liquid precursor plasma spray technology on WSP® torch. Vrstvy a povlaky 2012. Trenčín : LISS a.s, 2012 - (Šošovičková, J.), s. 7-12 ISBN 978-80-970824-1-3.
[ Abstract ]
[ Link ]
 
[Vrstvy a Povlaky 2012. Rožnov pod Radhoštěm (CZ), 08.10.2012-09.10.2012]
 Pejchal V., Mušálek R.: Lomovo mechanický prístup hodnotenia modifikovanej skúšky stanovenia priľnavosti žiarových nástrekov v ťahu – pin test. Sborník přednášek studentské vědecké konference JuveMatter 2012. Praha : České vysoké učení technické, 2012 - (Kunz, J.), s. 47-53 ISBN 978-80-01-05073-6. [ EN ] 
[ Abstract ]
[ Link ]
 
[JuveMatter 2012. Vysoká Lípa (CZ), 27.04.2012-30.04.2012]
 Mušálek R., Vilémová M., Matějíček J., Pejchal V.: Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength. Thermal Spray 2012: Proceedings from the International Thermal Spray Conference and Exposition. Materials Park, Ohio : ASM International, 2012 - (Lima, R.; Agarwal, A.; Hyland, M.; Lau, Y.; Li, C.; McDonald, A.; Toma, F.), s. 746-751 ISBN N. - (ASM International).
[ Abstract ]
[ Link ]
 
[International Thermal Spray Conference 2012 (ITSC 2012). Houston (US), 21.05.2012-24.05.2012]
 Bertolissi G., Brožek V., Chráska T., Mušálek R., Neufuss K., Mastný L., Sofer Z.: Production of nanoparticles utilizing water stabilized plasma. NANOCON 2012 - Conference Proceedings. Ostrava : Tanger, 2012, s. 33-38. ISBN 978-80-87294-32-1.
[ Abstract ]
[ Link ]
 
[NANOCON 2012. International Conference /4./. Brno (CZ), 23.10.2012-25.10.2012]
 Pala Z., Kolařík K., Mušálek R., Ganev N.: Residual stresses and roughness after blasting of steel substrates for ceramic plasma sprayed coatings. Proceedings of UNITECH´12 - International Scientific Conference. Gabrovo : Technicheski universitet - Gabrovo, 2012, s. 117-122. ISSN 1313-230X.
[ Abstract ]
[ Link ]
 
[International Scientific Conference Unitech ’12 Gabrovo. Gabrovo (BG), 16.11.2012-17.11.2012]
2011Pejchal V., Mušálek R., Matějíček J.: Pin test – an approach to adhesion/cohesion assesment of thermal spray coatings. Vrstvy a povlaky 2011. Trenčín : LISS,a.s, 2011 - (Šošovičková, J.) S. 135-140. ISBN 978-80-970824-0-6.
[ Link ]
 
[Vrstvy a Povlaky 2011. Rožnov pod Radhoštěm (CZ), 17.10.2011-18.10.2011]
 Mušálek R., Vilémová M., Pejchal V., Matějíček J.: Studie relevantnosti stanovení přilnavosti v tahu pro WSP nástřiky. Vrstvy a povlaky 2011. Trenčín : LISS,a.s, 2011 - (Šošovičková, J.) S. 117-122. ISBN 978-80-970824-0-6. [ EN ] 
[Vrstvy a Povlaky 2011. Rožnov pod Radhoštěm (CZ), 17.10.2011-18.10.2011]
 Brožek V., Chráska T., Mušálek R., Neufuss K.: Chemické aspekty přípravy protibalistické kovokeramiky plazmovou depozicí. APROCHEM 2011 Sborník přednášek. Praha : PCHE – PetroChemEng, 2011. S. 577-584. ISBN 978-80-02-02311-1. [ EN ] 
[Chemicko-technologická konference s mezinárodní účastí APROCHEM 2011/20./. Kouty nad Desnou (CZ), 11.04.2011-13.04.2011]
 Vilémová M., Matějíček J., Mušálek R.: Application of structure-based models of mechanical and thermal properties on plasma sprayed coatings. International Thermal Spray Conference (ITSC 2011). Düsseldorf : DSV-German Welding Society, 2011. S. 635-643. ISBN 978-3-87155-268-7.
[International Thermal Spray Conference 2011(ITSC2011). Hamburk (DE), 27.09.2011-29.09.2011]
 Vilémová M., Siegl J., Matějíček J., Mušálek R.: Effect of the grit blasting exposure time on the adhesion of Al2O3 and 316L coatings. International Thermal Spray Conference (ITSC 2011). Düsseldorf : DSV-German Welding Society, 2011. S. 1001-1006. ISBN 978-3-87155-268-7.
[International Thermal Spray Conference 2011(ITSC2011).. Hamburg (DE), 27.09.2011-29.09.2011]
2010Mušálek R., Matějíček J., Vilémová M., Kovářík O.: Non-Linear Mechanical Behavior of Plasma Sprayed Alumina Under Mechanical and Thermal Loading. Journal of Thermal Spray Technology 19 [1-2] (2010) 422-428.
[ Abstract ]
[ Link ]
 
[International Thermal Spray Conference (ITSC 2009):Expanding Thermal Spray Performance to New Markets and Applications. Las Vegas, NV, 04.05.2009-07.05.2009]
 Mušálek R., Kovářík O., Matějíček J.: In-situ observation of crack propagation in thermally sprayed coatings. Surface and Coatings Technology 205 [7] (2010) 1807-1811.
[ Abstract ]
[ Link ]
 
 Mušálek R., Vilémová M., Matějíček J.: Bonded Interface Technique for Failure Analysis of Thermal Spray Coatings. Vrstvy a povlaky 2010. Trenčín : LISS a.s, 2010 - (Šošovičková, J.) S. 63-68. ISBN 978-80-970514-2-6.
[ Abstract ]

[Vrstvy a povlaky 2010. Rožnov pod Radhoštěm (CZ), 04.10.2010-05.10.2010]
 Pejchal V., Mušálek R., Matějíček J.: Comparison of WSP and HVOF Sprayed Alumina Coatings Behavior during Mechanical Loading. Vrstvy a povlaky 2010. Trenčín : LISS a.s, 2010 - (Šošovičková, J.) S. 69-74. ISBN 978-80-970514-2-6.
[ Abstract ]

[Vrstvy a povlaky 2010. Rožnov pod Radhoštěm (CZ), 04.10.2010-05.10.2010]
 Mušálek R., Kovářík O., Skiba T., Haušild P., Karlík M., Colmenares-Angulo J.: Fatigue properties of Fe-Al intermetallic coatings prepared by plasma spraying. Intermetallics 18 [7] (2010) 1415-1418.
[ Abstract ]
[ Link ]
 
[FEAL 2009 - 5th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys. Prague, 21.09.2009-24.09.2009]
 Fasth A., Nylén P., Markocsan N., Mušálek R.: Characterization of Thermo-Mechanical Properties for Thermal Sprayed NiCoCrAlY Coatings. ITSC 2010 – International Thermal Spray Conference & Exposition: Conference Proceedings. Düsseldorf : DVS Media GmbH, 2010. S. 431-435. ISBN 978-3-87155-590-9. - (ITSC).
[ Abstract ]
[ Link ]
 
[ITSC 2010 – International Thermal Spray Conference & Exposition. Singapore (SG), 03.05.2010-05.05.2010]
 Mušálek R., Matějíček J., Pejchal V., Mari E., Valarezo A., Sampath S.: Influence of Pores and Cracks Morphology on Mechanical Behavior of Thermally Sprayed Ceramics. ITSC 2010 – International Thermal Spray Conference & Exposition: Conference Proceedings. Düsseldorf : DVS Media GmbH, 2010. S. 723-728. ISBN 978-3-87155-590-9. - (ITSC).
[ Abstract ]

[ITSC 2010 – International Thermal Spray Conference & Exposition. Singapore (SG), 03.05.2010-05.05.2010]
2009Skiba T., Voleník K., Neufuss K., Mušálek R., Karlík M.: In-flight State of Dual-phase Fe-Al Based Powder Particles Subjected to WSP Spraying. Proceedings of WORKSHOP 2009. Prague : Czech Technical University in Prague, 2009. S. 202-203. ISBN 978-80-01-04286-1. - (CTU REPORTS).
[ Abstract ]
[ Link ]
 
[Workshop 2009. Prague (CZ), 16.02.2009-20.02.2009]
 Mušálek R., Matějíček J., Vilémová M., Kovářík O.: Non-Linear Mechanical Behavior of Plasma Sprayed Coatings under Mechanical and Thermal Loading. Expanding Thermal Spray Performance to New Markets and Applications: Proceedings of the 2009 International Thermal Spray Conference. Materials Park, Ohio, USA : International Thermal Spray Association, 2009 - (Marple, B.; Hyland, M.; Lau, Y.; Li, C.; Lima, R.; Montavon, G.) S. 914-919. ISBN 978-1-61503-004-0.
[ Abstract ]

[International Thermal Spray Conference ,ITSC 2009. Las Vegas (US), 04.05.2009-07.05.2009]
 Mušálek R., Skiba T., Kovářík O., Colmenares-Angulo J.R.: Plasma Spraying of FeAl Intermetalics. Proceedings of WORKSHOP 2009. Prague : Czech Technical University in Prague, 2009. S. 174-175. ISBN 978-80-01-04286-1. - (CTU REPORTS).
[ Abstract ]
[ Link ]
 
[Workshop 2009. Prague (CZ), 16.02.2009-20.02.2009]
2008Mušálek R., Matějíček J.: Influence of Powder Injection on Mechanical Properties of Plasma Sprayed Copper and Tungsten Coatings. Proceedings of Workshop 2008. Prague : CTU Publishing House, 2008. S. 230-231. ISBN 978-80-01-04016-4. - (12. 1).
[ Abstract ]
[ Link ]
 
[Workshop 2008. Praha (CZ), 18.02.2008-22.02.2008]
 Matějíček J., Mušálek R.: Optimization of Powder Injection for Plasma Spraying of Tungsten and Copper. Vrstvy a povlaky 2008. Rožnov pod Radhoštěm : LISS, a.s., 2008. S. 113-116. ISBN 978-80-969310-7-1.
[ Abstract ]

[Vrstvy a povlaky 2008. Rožnov pod Radhoštěm (CZ), 29.09.2008-30.09.2008]
 Mušálek R., Kovářík O., Matějíček J.: Prediction of Mechanical Properties of Thermally Sprayed Coatings Using Finite Element Method. Vrstvy a povlaky 2008. Rožnov pod Radhoštěm : LISS, a.s., 2008. S. 117-122. ISBN 978-80-969310-7-1.
[ Abstract ]

[Vrstvy a povlaky 2008. Rožnov pod Radhoštěm (CZ), 29.09.2008-30.09.2008]
 Matějíček J., Mušálek R.: Processing and properties of plasma sprayed W+Cu composites. Thermal spray crossing borders : ITSC 2008 - International Thermal Spray Conference & Exposition. Düsseldorf : DVS Verlag, 2008. S. 1412-1417. ISBN 978-3-87155-979-2.
[ Abstract ]

[International Thermal Spray Conference. Maastricht (NL), 02.06.2008-04.06.2008]